Reset Glitch Hack (JTAG SERVICE)

 -->  Installation Diagrams  <--

These are blank and need programming, using a Jtag Cable, The Matrix NAND Programmer WILL NOT program the Glitcher, THESE DO REQUIRE EXTERNAL POWER FOR PROGRAMMING the 3.3v and GND on the programming ports do not provide power to program, please refer to the manual linked above,

If you having issues programming the Glitcher especially with LPT cable - Please try this program

Based on the GliGli Hack (a type reset glitch hack), it works by sending precisely timed pulses to the console's processor until the booting of unsigned code is successful. Once this has been Achieved, XeLL, the xenon Linux loader is booted.

It works on all versions of the X360 and X360 Slim motherboard (except Xenon motherboard) Regardless of the kernel version.

It features a xilinx cpld with on board voltage switch for slim/phat consoles and a built-in jtag port to ensure current and future compatibility with the "GliGLi hack" implementation.

• Booting of unsigned code on Xbox 360 and XBOX360 slim
• Compatible with both X360 (except Xenon) and X360 slim
• Works with all X360 NAND programmers
• Compatible with all X360 kernel versions
• Quick installation (7 Wires on Slim or 6 Wires on Phat)
• Compact PCB size with easy to solder pads.
• Booting of X360 unsigned code within max of 2 minutes
• Matrix Design and Quality
• Budget pricing
• Ability to update the chip via a JTAG cable.



We are back.

After several years since we gave our last contribution to the scene we decided that it was time to come back as we think that there is still lot of work to be done to bring innovation and quality in the console market.
After all we do still love this job too much : ).

A big difference from the past will be that we are not going to focus anymore on a single console, but we are going to spread our product line across all the consoles available on the market.

Our first product is going to be based on the GliGli hack. Maybe many do not fully realize it, but this guy made a hell of an Engineering work to get to that result and I personally want to congratulate him for having found something that is worth to be called an “Hack” !

To celebrate him and our comeback we decided to call this first new product “The Matrix Glitcher”.

If you are asking yourself why, you should remember “The Matrix” movie:

Trinity: A déjà vu is usually a glitch in the Matrix. It happens when they change something.

So, are you ready for the change?

You will need a Jtag Programming cable for this item. 

TUTORIAL & DIAGRAMS HERE

SLIM QUICK INSTALL DIAGRAM

World famous XBOX hardware developers Team Xecuter are happy to introduce the Xecuter CoolRunner - The Ultimate Reset Glitch Mod !

In early September 2011, Xbox scene homebrew gurus Tiros and GliGli announced that there was finally a way to boot unsigned (homebrew) code on Xbox phat & Slims regardless of which kernel was installed ! (before now JTAG'ing a console for homebrew was limited to very old versions of console/kernel and thus made them very difficult and expensive to buy)

Naturally a whole range of third party devices have come onto the market which were basically copies of the DIY design that was released by Tiros and GliGli. As usual the whole scene looked to Team Xecuter to see what design they could come up with to make this the most rock solid mod possible and they have done it again with the Xecuter CoolRunner !

The possibilities for homebrew on the Xbox 360 are endless. There have been hundreds of extra features since JTAG'ing became possible - from your own custom dashboards to legally backing up all your games to a huge 1TB hard drive !

FEATURES:

• Boot Unsigned Code On all Xbox 360 Phat*
• Boot Unsigned Code On all Xbox 360 Slim
• Works with both Phat and Slim in one device
• Compatible with all Xbox kernel versions
• Easy programming via JTAG cable (Supplied Separately)
• Power LED
• Reset Cycle LED
• All cables and adapters included for both Phat and Slim
• Wire adapters have precise lengths and guage for optimum performance
• Easy Install (7 Wires Slim, 6 Wires Phat)
• Powered by CK3 Lite, CK3 Pro or CK3i for JTAG Programming
• Works perfectly with the world famous Xecuter NAND-X
• Trusted Xecuter Design & Warranty

*Not available for the old Xenon motherboards.